Skeet Shooting Products: Ventriloquist

The VENTRILOQUIST - Voice Release is available for both trap and skeet. Both units use microprocessor based technology to recognize a voice and provide selectable target sequences (skeet) and delay options. The skeet version may also be used for trap. Two options are available, the Radio-Linked (skeet transmitter, trap transmitter, skeet receiver, trap receiver) version and the Wire-Linked (skeet wire-linked, trap wire-linked) version. The essential difference between the two versions is that the shooter's signal to the target machine(s) is transmitted via an FM signal in the "Radio-Linked" version versus a cable in the "Wire-Linked" version. Both units come standard with a lapel microphone and custom case. A throat microphone is available as an extra cost option.

Lapel Microphone is now standard issue with both Radio-Linked and Wire-Linked Ventriloquists.

For any questions regarding the VENTRILOQUIST and its components, please refer to the questions and answers page. If this page is unable to answer your question(s), please email or call 1-800-445-3038.

"Radio-Linked"

The lapel microphone plugs into the unit which is attached to the shooter's belt. The unit's controls and functions are shown below.

Skeet Transmitter Actual Dimensions -- 5.5" X 3.5" X 1.25"

	1. PWR (Power) Turns transmitter on/off.
	2. S(equence), D(oubles), L(ow), H(igh) Selects target to be released. (SKEET VERSION ONLY)
	3. PTR (Push To Release) Manual target release.
	4. MICROPHONE SENSITIVITY Sets minimum level of sound required to activate "voice" recognition program.
	5. TEST Flashes when "voice" is recognized and signal transmitted.
	6. LOW BATTERY Is lit when battery is too low for effective operation.

Trap Transmitter Actual Dimensions -- 5.5" X 3.5" X 1.25"

	1. PWR (Power) Turns transmitter on/off.
	2. PTR (Push To Release) Manual target release.
	3. MICROPHONE SENSITIVITY Sets minimum level of sound required to activate "voice" recognition program.
	4. TEST Flashes when "voice" is recognized and signal transmitted.
	5. LOW BATTERY Is lit when battery is too low for effective operation.

The receiver controls and functions are shown below.

Skeet Receiver Actual Dimensions -- 6.25" X 3.5" X 1.75"

	1. ON/OFF Turns receiver on/off.
	2. RESET Reset sequence to beginning (High 1).
	3. SEQUENCE Selects American or International target sequence.
	4. NUMBER OF SHOOTERS SHOOTERS (1 TO 5). "DASH" arms International Skeet delay. "DOT" changes International Skeet delay to Bad Puller delay.
	5. DELAY Sets release time •NONE Instantaneous Release •NORMAL .2 sec. delay (Corresponds to reaction time of average puller.) •INT • BAD Intrntnl Skt random delay (0 - 3 sec.) if Number of Shooters selected by "DASH" Bad Puller delay if Number of Shooters selected by "DOT".(random .1 -.4 sec.)
	6. LED(s) (Light Emitting Diode) LEDs show which target is being released (High/Low).

Trap Receiver Actual Dimensions -- 6.25" X 3.5" X 1.75"

	1. ON/OFF Turns receiver on/off.
	2. DELAY Sets release time •INT • BAD Bad Puller delay on trap versions.
	3. LED (Light Emitting Diode) LED shows when target is released.

"Wire-Linked"

This version of the VENTRILOQUIST uses all of the applicable technology from the "Radio-Linked" version. The unit is pictured below and consists of a compact controller, lapel microphone, 100 foot cable, custom belt, and custom carrying case. The controller is connected to your release cord outlet via the cable. The controller's microprocessor recognizes your "PULL" and releases the target(s). The programmed sequence of the SKEET version can be interrupted to repeat a target or clear a machine with no disruption of the American or International skeet sequence. The unit's controls and functions are illustrated below.

Skeet Wire-Linked Version Actual Dimensions -- 5.5" X 3.5" X 1.25"

	Selectable Options 0=> Am Seq, 1 Shooter, Norm Delay 1=> Am Seq, 1 Shooter, No Delay 2=> Am Seq, 1 Shooter Bad Puller 3=> Am Seq, 2 Shooters, Norm Delay 4=> Am Seq, 3 Shooters, Norm Delay 5=> Am Seq, 4 Shooters, Norm Delay 6=> Am Seq, 5 Shooters, Norm Delay 7=> Int Seq, 1 Shooter, Int Delay 8=> Int Seq, 2 Shooter, Int Delay 9=> Int Seq, 1 Shooter, Norm Delay

Trap Wire-Linked Version Actual Dimensions -- 5.5" X 3.5" X 1.25"

	Trap Delay Options 0=> Normal Delay 1=> No Delay 2=> Bad Puller Delay

Back to Ventriloquist Homepage.